Isolating transformer for use in IT networks according to VDE 0100-710; device for medical appliances and health care environment. Primary-/ Secundary voltages: 230 / 230 V.
1 phase isolating transformer according to VDE 0100-710 requirements.
Construction according to protection class II; enhanced insulation (test voltage 4 KV between PRI / SEC shielding)
Static shielded winding between Primary- and Secundary winding; directed to insulated feeder clamp.
Products
1AC Isolating Transformer with Static Shielded WindingTT 0.32 - 2.5kVA according to IEC/DIN EN61558-2-4
Flush mounting isolating transformer for safety application “mains breakup”.
Device protection used in normal or harsh environment. Electrical equipment must be disconnected from mains power network, protected active parts of equipment not grounded.
1AC Isolating Transformer with Static Shielded WindingTTN 0.025 - 0.25kVA according to IEC/DIN EN61558-2-4
Device protection used in normal or harsh environment. Electrical equipment must be disconnected from mains power network, protected active parts of equipment not grounded.
1AC Isolating Transformer with Static Shielded Winding / Slim, space saving versionTTH 0.063 - 0.26kVA according to IEC/DIN EN61558-2-4
Extreme slim design for space-saving applicationsSpecial winding construction (1 chamber with shielded winding between PRI and SEC) allows excellent attenuation of mains failures (symmetric/ asymmetric) in SEC circuit.
Shielded winding delivery status: Common grounding connected to transformer core.
Standard voltages: PRI 230 V and SEC 230 V.
Voltage range PRI 100 V – 600 V and SEC 12 – 400 V on request.
1 Phase Autotransformer, terminal tag connections, with screw type terminalsVT25 - 75VA according to IEC/DIN EN61558-2-13
1 phase pre-circuit transformer according to IEC/EN61558-2-13 (autotransformer) for general applications without the need of a galvanic isolation, e.g. for transforming typical mains voltage to other voltages needed by tools, machinery or other devices.
VT pre-circuit transformers and other autotransformers do not provide any electrical protection due to the lack of galvanic isolation between input and output windings.
3 Phase Autotransformer for vertical mountingDAS 0.1 - 2.0kVA according to IEC/DIN EN61558-2-13
3 phase autotransformer according to IEC/EN61558-2-13 for general applications without the need of a galvanic isolation, e.g. for transforming typical mains voltage to other voltages needed by tools, machinery or other devices.
Autotransformers do not provide any electrical protection due to the lack of galvanic isolation between input and output windings.
3 Phase Autotransformer for vertical mountingDAS 2.0 - 5.0kVA according to IEC/DIN EN61558-2-13
3 phase transformer according to EN61558-2-13. protection class I ready. Due to innovative vacuum impregnation in polyester varnish, the noise level is extraordinary low. Screw terminals are contact proof according to BGV A3.
Autotransformers are provided for a voltage range from 100 V up to 550 V (special voltage versions on request).
3 Phase Autotransformer for vertical mountingDAS 5.0 - 35kVA according to IEC/DIN EN61558-2-13
3 phase transformer according to EN61558-2-13. protection class I ready. Due to innovative vacuum impregnation in polyester varnish, the noise level is extraordinary low. Screw terminals are contact proof according to BGV A3.
Autotransformers are provided for a voltage range from 100 V up to 550 V (special voltage versions on request).
3 Phase Autotransformer with module core for vertical mountingDAM 25 - 630kVA according to IEC/DIN EN61558-2-13
3 phase transformer according to EN61558-2-13. protection class I ready. Due to innovative vacuum impregnation in polyester varnish, the noise level is extraordinary low. Screw terminals are contact proof according to BGV A3. Connection bolts are used for currents > 520 A.
Autotransformers are provided for a voltage range from 100 V up to 550 V (special voltage versions on request).
3 Phase Autotransformer, horizontal mounting version with screw type terminalsDAL 2.0 - 5.0kVA according to IEC/DIN EN61558-2-13
3 phase transformer according to EN61558-2-13. protection class I ready. Due to innovative vacuum impregnation in polyester varnish, the noise level is extraordinary low. Screw terminals are contact proof according to BGV A3.
Autotransformers are provided for a voltage range from 100 V up to 550 V (special voltage versions on request).
Standard switching matrix: Yan0 (typical star load approx. 10%). If typical star load should reach rated current, switching matrix Zan0 is used.