Use
For complex systems with any number ob DC servo controllers
and very long cable lenghts
Products
Optimized air coolingAlternative to water cooling
Applications
Plug and Play -> integrated air cooling system ready to use
Power up to 2500kVA or currents up to 6000A
Application for transformers, chokes, filter and other magnetics possible
Motorchoke / Motorchoke plusDMD 10 up to 1500Hz acc. IEC/DIN EN61558-2-20 and UL1446
Applications and description
By using a motor choke from the Schmidbauer DMD series, the capacitive recharging currents are suppressed when using shielded motor cables. This increases the service life of the engine. In addition, the motor noise is reduced when the current changes.
The use of high-quality raw and insulating materials in accordance with our UL insulation systems class B and F as well as careful processing Made in Germany guarantee a long service life.
Schmidbauer UR-Isolationssystem acc. UL 1446 File E181051
DNT– 3AC power supply 24V acc. IEC/DIN EN60950primary volatage: : 400V AC with secondary voltage: 24V
Applications
These three – phase dc power supplies of the DNT series supply an unregulated DC voltage of 24V DC with a residual ripple of <5% under nominal conditions.
LCL Filter
Applications and description
LCL filters are used to connect AIC (active infeed converter) and AFE (active front end) drives to the mains.
GN GGN (1-phase)
Applications
24V DC power supplies based on the proven, reliable and robust 50Hz technology. The output voltage of these unregulated power supplies meets the requirements of DIN19240 with mains fluctuations of ± 10% of the supply voltages, the residual ripple of the output current is below 5%, typically about 3%.
DC power supply 24V acc.IEC/DIN 60950Pri: 230V AC or 115/230/400V AC with Sec: 24V
Applications
24V DC power supplies based on the proven, reliable and robust 50Hz technology. The output voltage of these unregulated power supplies meets the requirements of DIN19240 with mains fluctuations of ± 10% of the supply voltages, the residual ripple of the output current is below 5%, typically about 3%.
Railway Transformers
Fields of applications
Railway transformers for generall applications such as safe isolation of vehicle power supply.
Isolating transformers secure safe galvanic separation between primary and secondary winding.
Water-cooled reactorsfloating cooled 90% of the heat into the water
Applications
Water-cooled reactors are excellently suited for water-cooled inverter technology. A potential-free water cooling simplifies water cooling in the entire system.
3AC filter reactorDFD accor. IEC/DIN EN61558-2-20 und UL1446
Purpose and description
The use of a filter circuit reactor of the Schmidbauer DFD series will result in the filter circuit reactors that are created in compensation systems.