1 Phase Control-/ Isolating Transformer according IEC/DIN EN61558-2-2STS 2,0 - 10kVA

1 phase control transformer

according to IEC/EN61558-2-2 for power supply of control circuits in machinery, terminal blocks (VDE0113/ EN60204).

Specifications

• 1 phase control transformer offering high short-time power at very low short circuit voltage.
• Due to innovative vacuum impregnation in polyester varnish, the noise level is extraordinary low.
• Screw terminals contact proof according to VBG4.For voltage adjusting purposes, primary winding offers taps at ±5% of nominal input voltage of nominal input voltage.
• Screw terminal ends (M8 screw) for output currents > 135 A and output voltages < 42 V are not contact proof.
• Vertical mounting via angle brackets, any mounting position or angle possible

1 phase control-/isolating transformer, safety transformer

according to IEC/EN61558-2-2

Input voltage	100 V … 600 V (Standard 400 V)
Output voltage	24 V … 600 V (Standard 230 V)
Rated frequency	50/60 Hz
Output power	2 KVA … 10 KVA
Max. ambient temperature	40°C
Insulation class (IEC85)	B3 Standard
Isolationsklasse (IEC85)	B 130°C
Fire protection class	UL94HB (V-0 possible)
Open transformer  degree of protection	IP00
Protection class	I ready

• Welded ground wire connection 2 blade terminals 6.3 x 0.8 mm
• Mounting via angle brackets in any mounting position or angle possible
• Screw terminals contact proof according to VBG4
• Transformer completely vacuum impregnated

To the data sheet